Commercial Fire Rated Doors
video

Commercial Fire Rated Doors

Surface Finishing: Melamine Paper
Feature: Fireproof, Soundproof, Waterproof,Warp-resistant
Application: Hotel Room, Clinic Room, Class Room, Office Room
Opening Style: Push and Pull
Brand Name: DYWM
Place of Origin: China
Main Material: Composite Board + Solid Wood
MOQ: 10 Sets
Certificates: CE, COO
Warranty: 3 Years

Description

Technical Parameters

Introduction

 

Commercial fire rated doors meet Chinese standard GB 12955. They are special doors for commercial buildings, with fire integrity and heat insulation. They are made of door frame, door leaf, fire core material and fire hardware,such as door closer, coordinator and fire seal strip. They can block fire, thick smoke and hot air for a fixed time: Class A over 1.5 hours, Class B over 1 hour, Class C over 0.5 hours.They are key fire separation parts for commercial buildings. Different from common doors, they are fire resistant, smoke tight, self-closing and with CCCF certification.

 

Main types: steel door, fire wood door, steel-wood door.

 

Widely used in: Fire zone passages between shops, restaurants and cinemas; Evacuation stairs and emergency exits; Underground malls, supermarkets and cinema entrances; Machine rooms, electric rooms and pipe shafts; Office area separation doors; Elevator lobbies and document rooms; Hotel corridor exits; Fire isolation doors for kitchen and back area; Underground garage connecting doors, club and staff passages.

 

Core Filling Materials

 

This commercial fire rated door uses a multi-layer composite fire-resistant structure. It is a safety solution designed for high-traffic, high-risk commercial buildings. The top and bottom high-density magnesium oxide fire boards are the first line of defense. They are Class A non-combustible materials, which will not burn or burst when exposed to fire. They keep the door panel complete for a long time, block flames and high heat from going inside, and also give the door stable support to prevent it from deforming or cracking under high heat. The middle of the door is filled with graphene fire-resistant core material. It is made of graphite-modified inorganic base material, with excellent heat insulation and flame resistance. When there is a fire, it quickly absorbs and blocks heat, slowing down the temperature transfer to the non-fire side. It meets both the national standard requirements for fire integrity and heat insulation, buying precious time for people to escape and firefighters to work.

 

Inside, solid wood squares are used as support frames to keep the door stable and durable for daily use. The surface can be matched with various colored finishes. This multi-layer structure not only improves fire resistance, but also makes the door more resistant to impact and deformation. It also meets the fire inspection standards.

 

fire rated 60 min.jpg

 

Applications

 

Commercial fire rated doors.jpg

This commercial fire rated door in the elevator lobby fits perfectly with high-end office building scenes. Its light gray wood-grain finish matches the marble walls and linear lights. It doesn't break the look of the public area, and clearly separates the elevator lobby from the escape passage. It is where fire safety design meets space aesthetics. As a door between the elevator lobby and the evacuation stairwell, it quickly blocks fire and smoke from spreading into the elevator lobby during a fire. It stops smoke from blocking the main gathering area, keeps the escape passage safe and clear, and buys enough time for people in the building to escape. With a simple flat design and matching door frame, it looks neat and elegant. The stainless steel kick plate at the bottom can stand frequent impacts from people in the elevator lobby. It is also wear-resistant and stain-resistant, perfect for high-traffic public areas. It combines durability and good looks.

The dark gray vertical grain finish matches the wooden wall panels and metal lines in the hallway perfectly. The dark door frame blends in with the luxury tones of the space. It meets the fire separation needs of hotel public areas without breaking the overall look, creating an "invisible fire safety" effect. As a commercial fire rated door between the hallway and the evacuation stairwell, it effectively blocks thick smoke and high heat from fires, stopping the fire from spreading along the hallway. It also keeps smoke out of guest rooms, protecting the safety of guests. Its tight seal also reduces noise, keeping guest rooms quiet and comfortable.

The fine vertical grain finish improves the door's texture. With a simple metal handle, it looks low-key and high-end. The stainless steel kick plate at the bottom can stand frequent impacts from hotel carts and people. It is also moisture-proof and rust-proof, fitting the humid environment of hotel public areas. It stays looking good even after long use.

fire rated doors.jpg

Commercial fire rated 60 min.jpg

As a fire door between the underground parking lot and the building's stairwell and equipment rooms, it effectively blocks flames and thick smoke from car or rubbish fires in the lot from spreading into the building. It slows down the fire and keeps smoke out of the escape passage, building a safe line of defense for the high-risk underground parking area. The thickened door frame and panel can stand accidental hits from cars and carts in the lot, with better impact resistance. The moisture-proof and rust-proof material works well in the damp, poorly ventilated underground environment, so it won't easily warp or break over time. The stainless steel kick plate at the bottom further improves the door's wear resistance, making it last longer.

Installing commercial fire rated door between the archive room and public areas is very important. When there is a fire, it effectively blocks flames and high heat, slows the spread of fire, and protects important documents in the archive room from being destroyed. It also has good heat and smoke resistance, keeping thick smoke and high heat out of the archive room, reducing the risk of documents being damaged by smoke or high temperatures. With a simple flat design and matching door frame, it looks clean and neat, fitting the professional style of office space. The door panel is stable and not easy to deform, so it can stand frequent opening and closing in the office area. The stainless steel kick plate at the bottom can resist impacts from carts and people, and is also moisture-proof and stain-resistant, meeting the archive room's need for a clean environment.

fire door 60 min.jpg

 

How to Partner with Us

One May Dee Show Furniture is a professional integrated source factory for wooden doors, wall panels, and cabinets. If you have needs for Commercial Fire Rated Doors, please contact us.

Address: Laomiao Village, Dacheng Town, Sanyuan County, Xianyang City, Shaanxi Province, China.

Tel.: +86-13735815925

 

Hot Tags: commercial fire rated doors, China commercial fire rated doors manufacturers, suppliers, factory, wooden fire door, Wooden Paint free Fire Door, Fire rated Doors, Commercial Fire Rated Doors

Production Parameters

 

Product Name

Commercial Fire Rated Doors

Finishing

Pre-fininshed

Application

Hotel Room,Bedroom, Classroom, Office, Kitchen Room

Veneer

Melamine Paper + MDF Board + Fireproof Board

Skeleton

LVL Board

Core Filling

Graphene Composite Board, Fireproof Board

Door Way Size

2100x900mm

Wall Thickness Range

90~300mm

Door Leaf Size

2050x830x46mm

Colour

Bionic Wood Grain, Solid Colour without Texture, Glossy or Customized

Accessories

Frame, Trim, Lock Set, Flush Hinge, Door Stop

Frame & Trim Material

Melamine + MDF + Solid Wood

Package

Soft Edge Protectors + Cushioning Foam + PE Bag + Carton+Pallet

 

[[ProInfoAttach]]
[[ProDetailSubTitle2]]

Send Inquiry